Tungsten carbide high-performance burr ALU pointed tree SPG dia. 06x18 mm shank dia. 6 mm HICOAT coated for aluminium/non-ferrous metals

Technical information

Cut: ALU HC-NFE
Dia. external: 10 mm
Dia. shank: 6 mm
Length, cut: 20 mm
Length, total: 60 mm
RPM, hard non-ferrous metals: 19000 - 41000 RPM
RPM, soft non-ferrous metals: 19000 - 41000 RPM
RPM, thermoplastics, fibre-reinforced plastics (GRP/CRP): 19000 - 41000 RPM
Packaging unit: 1 piece

Description

The use of burrs with the PFERD TOOLS HICOAT coating HC-NFE prevents chips adhering during work on soft aluminium alloys. This increases the tool life and improves the surface quality of the workpiece.

Pointed tree-shaped burr according to DIN 8032, flattened tip.

Special features

Mainly used for long-chipping and lubricating non-ferrous metals.
Maximum stock removal rate.
Effective chip removal through improved anti-adhesion characteristics.
Lower thermal loads.
Increased tool life.
The highly accurate concentricity enables impactfree working without creating chatter marks. This considerably reduces wear on the tool and tool drive.

Recommendations for use

To prevent vibrations, place the tools on powerful drives with an elastically supported spindle wherever possible.
Observe the recommended rotational speeds.
If the smallest area of the burr diameter is being used, the recommended rotational speed can be increased accordingly.
To ensure costeffective use of burrs, use a higher rotational speed and cutting speed. Use burrs with a shank diameter of 6 mm with drives with a power output from 300 watts.

Materials that can be worked: Aluminium; Brass; Bronze; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hard aluminium alloys; Hard non-ferrous metal; Plastics; Soft aluminium alloys; Soft non-ferrous metal; Thermoplastics; Tough aluminium alloys; Zinc

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work; Work on weld seams

Drive types: Automated centres; Drive spindle; Flexible shaft drive; Robot; Straight grinder; Tool machine

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends burrs with the HICOAT coating for working for long periods with low levels of fatigue, whilst saving resources and achieving perfect results as quickly as possible.

Downloads

brochure-tc-burrs-alu-cut-2020-web-en.pdf

Tungsten carbide burrs for high performance, ALU HC-NFE, pointed tree shape SPG

Tungsten carbide high-performance burr ALU pointed tree SPG dia. 06x18 mm shank dia. 6 mm HICOAT coated for aluminium/non-ferrous metals

SPG 1020/6 ALU HC-NFE

PFERD TOOLS EFFICIENCY

PFERD TOOLS Newsletter subscription