Cup brush crimped TBU dia. 60 mm shank dia. 6 mm SiC filament dia. 0.90 grit 180

Technical information

Cup brush crimped TBU dia. 60 mm shank dia. 6 mm SiC filament dia. 0.90 grit 180

Dia. external: 60 mm
Dia. filament material: 0.9 mm
Dia. shank: 6 mm
Filament material: Silicon carbide (SiC)
Grit size: 180
Length, filament: 20 mm
Length, total: 3-3/8
Length, total: 85 mm
Max. RPM: 4500 RPM
Mounting system: Shank
RPM, optimum, from: 1800 RPM
RPM, optimum, to: 2900 RPM
Width: 15 mm
Packaging unit: 10 pieces

Description

Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint. Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece.

Cup brush with plastic-covered brush body.

Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement.

Plastic filament withstands temperatures up to 220 °C.

Advantages

Highly flexible, enabling optimal adjustment to the workpiece contour.
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.

Recommendations for use

Please observe the recommended rotational speeds.
For the best results, use a tool drive with a minimum output of 300 watts.
Use coolant for applications where large amounts of heat are produced.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This applies in particular for use in the high rotational speed range. The minimum clamping length is 10 mm.

Materials that can be worked: Aluminium; Bronze; Cast iron; Cast steel; Cobalt-based alloys; Other non-ferrous metals; Stainless steel (INOX); Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Roughening; Structuring (matt finishing, brush matting and satin finishing)

Drive types: Drive spindle; Flexible shaft drive; Power drill; Straight grinder

Downloads

Cup brushes crimped shank-mounted

Cup brush crimped TBU dia. 60 mm shank dia. 6 mm SiC filament dia. 0.90 grit 180

PFERD Newsletter subscription