ceramic oxide grain abrasive belt BA 75x2000mm CO80 for maximum stock removal on steel with a belt grinder

Technical information

Abrasive: Ceramic oxide grain
Acc. to ISO: ISO 2976
Grit size: 80
Length: 2000 mm
Width: 75 mm
Packaging unit: 10 pieces

Description

For aggressive grinding with maximum stock removal rate and very good tool life. Consistently high performance due to self-sharpening ceramic oxide grain. The ceramic oxide grain is specifically designed for work on hard materials and layers.

Long belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Advantages

High tear strength with optimum flexibility.
Consistent results through very good grain adhesion.
High economic efficiency due to high abrasive performance and long tool life.

Recommendations for use

Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes

Follow the safety notes from the VDS (German Abrasives Association) â€œSafety notes for correct use of abrasive beltsâ€.

Materials that can be worked: Aluminium; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 1,200 N/mm² (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Deburring; Leveling; Sharpening; Step-by-step fine grinding; Working on edges; Work on weld seams

Drive types: Belt grinders and belt arms

Downloads

Long belts

ceramic oxide grain abrasive belt BA 75x2000mm CO80 for maximum stock removal on steel with a belt grinder

Matching accessories & spare parts

PFERD Newsletter subscription