Zirkon abrasive belt BA 50x2000mm Z120 for high stock removal with a belt grinder

Contact Us +44 1484 866149 info.uk@pferd.com

Matching accessories & spare parts

Grinding oil 410 Fe

Grinding oil 411 NE

Grinding oil 410/1 Fe

Grinding oil 410/5 Fe

Grinding oil 411/1 NE

Grinding oil 411/5 NE

Grinding oil 412 ALU

Grinding oil 412/1 ALU

Grinding oil 412/5 ALU

Technical information

Zirkon abrasive belt BA 50x2000mm Z120 for high stock removal with a belt grinder

Abrasive: Zirconia alumina Z
Acc. to ISO: ISO 2976
Grit size: 120
Length: 2000 mm
Width: 50 mm
Packaging unit: 10 pieces

Description

For coarse grinding work with a high stock removal rate and a long tool life.

Long belts are compatible with commonly available belt grinders. In ISO 2976, they are listed under the designation "abrasive belts".

Advantages

High tear strength with optimum flexibility.
Consistent results through very good grain adhesion.
High economic efficiency due to high abrasive performance and long tool life.

Recommendations for use

Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.

Safety notes

Follow the safety notes from the VDS (German Abrasives Association) â€œSafety notes for correct use of abrasive beltsâ€.

Materials that can be worked: Annealed cast iron; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 1.200 N/mm² (< 38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC

Applications: Deburring; Leveling; Sharpening; Step-by-step fine grinding; Working on edges; Work on weld seams

Drive types: Belt grinders and belt arms

Downloads

PFERD Newsletter subscription

Register here free of charge for our PFERD newsletter and receive all the latest news on products, services and promotions from the world of PFERD on a regular basis.